%====================================================================%
%                  SPROCL.TEX     27-Feb-1995                        %
% This latex file rewritten from various sources for use in the      %
% preparation of the standard proceedings Volume, latest version     %
% by Susan Hezlet with acknowledgments to Lukas Nellen.              %
% Some changes are due to David Cassel.                              %
%====================================================================%

\documentstyle[sprocl,epsfig]{article}

%\input{psfig}
\bibliographystyle{unsrt}    % for BibTeX - sorted numerical labels by order of
                             % first citation. 

% A useful Journal macro
\def\Journal#1#2#3#4{{#1} {\bf #2}, #3 (#4)}

% Some useful journal names
\def\NCA{\em Nuovo Cimento}
\def\NIM{\em Nucl. Instrum. Methods}
\def\NIMA{{\em Nucl. Instrum. Methods} A}
\def\NPB{{\em Nucl. Phys.} B}
\def\PLB{{\em Phys. Lett.}  B}
\def\PRL{\em Phys. Rev. Lett.}
\def\PRD{{\em Phys. Rev.} D}
\def\EPJ{{\em Eur. Phys. J.} C }
% Some other macros used in the sample text
\def\st{\scriptstyle}
\def\sst{\scriptscriptstyle}
\def\mco{\multicolumn}
\def\epp{\epsilon^{\prime}}
\def\vep{\varepsilon}
\def\ra{\rightarrow}
\def\ppg{\pi^+\pi^-\gamma}
\def\vp{{\bf p}}
\def\ko{K^0}
\def\kb{\bar{K^0}}
\def\al{\alpha}
\def\ab{\bar{\alpha}}
\def\be{\begin{equation}}
\def\ee{\end{equation}}
\def\bea{\begin{eqnarray}}
\def\eea{\end{eqnarray}}
\def\CPbar{\hbox{{\rm CP}\hskip-1.80em{/}}}%temp replacement due to no font


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%                                                %
%    BEGINNING OF TEXT                           %
%                                                %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\begin{document}

\title{YOUR TITLE\\}

\author{ YOUR NAME }

\address{Institution and Address}


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% You may repeat \author \address as often as necessary      %
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\maketitle\abstracts{
The abstract for your talk
}
  


%***********************************************************************
\section{Introduction}
%***********************************************************************
This is a sample for the style of articles.
It would be a guide for the size of the page format and the size of characters.
The size of the text is 200 mm high and 140 mm wide.
There is a headheight of 10 mm for formatting the style of the
proceedings. The characters are 11 point large, and the single column style
is chosen.
The baselineskip for the separation between lines are standard.
Figures and pictures should be included as eps files. 
They will be printed in colour. Please provide them in CMYK colours.

The preparation of articles should be made in TEX or LATEX files. 
You may compile them into postscript files, or we do.
Please submit the source files with figure files.

The due date for submission is the last day of August.

The length of the contributed articles is alloted  
according to the ratio of one printed page per 5 minute talk, 
including pictures and figures and tables.
Thus, if you have talked for 20 minutes, 
the printed version of your article should not exceed 4 pages. 

\section{The Presentation Style}

The title of the article and the names of authors should be written in full
capital letters. 
The addresses should be in italic, it is formatted automatically using this model.

The first character of each word of the title of the section should be 
written in capital letters
while only the first character of the first word of the title of the 
subsection should be written in capital letter.

\subsection{Figures, pictures, and tables}

Figures, pictures, and tables may conveniently be placed where the authors 
think as suitable.
The captions describing the figures, pictures, and tables should follow 
immediately after them.

Examples:

%1)
     \begin{figure}[ht] 
     \begin{center}
     \vspace*{.2cm}
     \epsfig{file=j_aleph_KK.eps,width=6.5cm}
     \end{center}
     \caption{$\tau \rightarrow \nu_\tau K_s K_l ~\pi$.} 
     \label{fig:tauKK}
     \end{figure}
%2)
     \begin{figure}[ht]
     \begin{center}
     \begin{tabular}{cc}
     \mbox{\epsfig{file=wwzz30_colourH.eps,width=5.7cm}}&
     \mbox{\epsfig{file=wwzz60_colourH.eps ,width=5.7cm}}
     \end{tabular}
     \end{center}
     \caption{Study for the $W_L$ scattering. Pairs of W's and Z's have been
generated with different jet resolutions. The resolution is parametrised as
$\Delta E = \alpha / \sqrt E$, on the left $\alpha = 0.3$,
on the right $\alpha = 0.6$.}
     \label{fig:wwzz}
     \end{figure}

References are denoted and numbered as [1], [2], or [3-5] at the end of 
the referring words or sentences [6].  




\section{Conclusion}


..... but instead of what?


\section*{References}
\begin{thebibliography}{99}
\bibitem{NNNMSSM}{I. Auriculaire \EPJ \rm {\bf 137} (1892) 36.}\\

\end{thebibliography}

\end{document}
